Model 9600B Downdraft Table

Model 9600 B - Cartridge Filter
 This model contains 4 cartridge filters that clean to .5 micron. It features push button cleaning, which requires a button to be pushed 3-5 times a day, thereby releases a large amount of compressed air into filters. The air pulses off the dust, which drops into drawers below the filters. The drawers should be cleaned a few times a month, or as needed. These tables are designed to set end to end, allowing filters and drawers to be serviced from the front of the machine. The top, as with all other models, has a spray on rubber type finish.

Size : 48" X 96" Height - 36"
Weight : 1200 lbs
CFM : 4800 CFM After Filter
Motor : 5HP - 3PH OR 1PH
Voltages : 220 - 1PH, 230 - 3PH, 460 - 3PH, and 575 - 3PH
Sound Level : 82 Decibels
Options : auto-timer, muffler, explosive proof motor

General Information 
MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
RECEPTACLES You must bring power into them from an electrical source outside the table.
CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
HEIGHTS may be altered, call for information.
TOPS are �" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
HYDRAULIC MOTORS are available to run fans.
WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers