A Christian Owned Corporation

You have 0 item in your cart

You have no items in your shopping cart.

Subtotal: $0.00

Schultz Slot Former 6' Model

More Views

Schultz Slot Former 6' Model

Be the first to review this product

Schultz Slot Former 6' Model

Availability: In stock

$4.00

With this product, you earn 3395 loyalty point(s).

Specialtytools.com has offered this Slotformer for over 20 years now. The machine was originally designed and manufactured by Rod McDonald His son in law, Marty has taken over the business, made a few imporvements and continues to manufactures this and other quality from machines. The design is simply and functional, no bells and whistles here but none are needed. Here is what Marty has to say about his machines:

The demand has been to produce the 180° wrap quickly, more efficiently and to wrap all the way around with only one seam on the backside.  To this end, we have designed the Model SF-12 and SF-6 Slotformer®.  This is the quickest, easiest and least expensive method of obtaining a full wrap around.  In a matter of minutes and inexperienced operator can learn how to produce 180° wraps.  You can bend all formable high-pressure laminates from the thicker countertop materials to the thinner cabinet and surfacing materials as well as real wood veneers.  Ninety-degree bends, no drip edges and a multitude of other shapes can also be formed easily on this machine.  This product will produce hundreds of wraps per day and will make money for your company.

On each model the rear platen is adjustable down from 6-1/4” to whatever diameter rolled edge is desired.  On Model SF-12, the front and lower pressure platens are divided at the center to allow for individual operation.  A switch on the control panel marked 12 ft. / 6 ft. selects the mode required.  Located along the SF-12 front edge are left and right hand switches.  In the 6 ft. mode, each switch operates the left or right pressure platens respectively. In the 12 ft. mode, either switch operates the entire pressure length.  The rear adjustable platen and Dual Quartz Heater remain full length during all operations.  On both models, the lower pressure platen need not be activated when doing 180° full wraps and may be turned off as required. 

Model SF-12 is 150” long, 26” wide and 30” high.  The Dual Element Quartz Heater included, is 157” long and 6” wide.  A simple connection is provided for the 208/230 volt, 1 phase 40 amps power.  An air regulator and gauge is located on the equipment for easy access.  One 2oz. bottle of Tempilaq is included along with complete instructions on both models.

Model SF-6 is 78” long with all the features of the 12 ft. model and is designed for those who do not require a divided front platen.  Power requirements for the 6 ft. model are 208/230 volt, 1 phase, 30 amps.  All equipment comes with a limited one-year warranty.

COVE NOTES: The PDF links at the bottom of this page are links to what may behelpful notes on forming laminate tops. 

Shapes you can form with a SlotformerNotes on Postforming

 

post former, post forming


laminate forming, bending machine,post former, post forming, postforming, postformer

Additional Information

SKU S07-SF6
Weight 400.0000
This item ships from: Mesa,AZ
Ships via Truck

Customer Reviews

Write Your Own Review

Use spaces to separate tags. Use single quotes (') for phrases.