You have no items in your shopping cart.
Model 4896LP
This model is designed to sand larger size products without the strain normally associated with very tall products. With the top in down position the height of the machine is 26� with a 12� adjustment, allowing the height to reach 38� in 30 seconds. At the push of a button the top raises by hydraulic, with a nylon coated fabric accordion skirt sealing the opening between the machine and the top. The heights may be stopped at any location between the top and bottom. This machine has the standard feature of push button cleaning, with filters the clean to .5 micron. This model may also be built at a standard height of 25� with no height movement.
Size : 48" x 96" Height: 26" to 38"
Weight : 1000 lbs
CFM : 4800 after filters
Motor : 5HP
Voltages : 3PH/230,460, or 575 volt
Sound Level : 82 decibels
General Information
MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
RECEPTACLES You must bring power into them from an electrical source outside the table.
CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
HEIGHTS may be altered, call for information.
TOPS are �" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
HYDRAULIC MOTORS are available to run fans.
WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers.
Additional Information
SKU | D05-4896LP |
---|---|
Weight | 1000.0000 |
This item ships from: | Mt Vernon, MO |
Ships via | No |