Model 3696SS Downdraft Table

Model 3696SS
 Solid Surface This table has a very unique feature: all of the inlet air enters the table through a long slot on each side. One side may be closed, which doubles the suction on the open side, a great feature when routing or with the removal of large amounts of dust. A highlight of this unit is the chip deflector (shown in close up pictures), which is mounted on hinges and held in the upright position by two magnets. As a piece is being routed, the router chips hit the deflector, then are sucked down into the machine. The deflector can quickly be swung up into position or down out of the way. Great for house doors, table tops, counter tops, etc. Counter sink bowls can be positioned inside the machine, allowing unlimited access to the counter top's edges.

Size : 36" X 96", 36" tall, actual top 27" wide
Weight : 4800 After Filters
CFM : 78 Decibels
Options : exhaust chimney

General Information 
MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
RECEPTACLES You must bring power into them from an electrical source outside the table.
CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
HEIGHTS may be altered, call for information.
TOPS are �" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
HYDRAULIC MOTORS are available to run fans.
WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers.