Product Information:
The EB40 is a fully Automatic Edgebander from Virutex. Like the entire Virutex line, the EB40 is quality though and through. The EB40 applies and trims tapes up to 3mm and plastic laminate strips. The panels enter from the right and exit on the left completly finished. The EB40 is a true Production Edgebander for small, medium and large shops. Edgebanders
 |  |  |
| For tapes up tp 3mm thick and plastic laminate strips. Auto flush trim top, bottom and both ends. | Easy and diect adjustment ot the trimming bits and copy devices by digital meters. | Simultaneous adjustment fo tape thickness, the guide and the gluing roller by a single digital meter. |
 |  | |
| Fitted with e teflon coated glue pot and cover. Easy adjustment of glue flow. | A standard dust collection port allows for use of your own shop vac or a Virutex model. | |
Specifications
· For tapes up to 3 mm ( up to 1/8" )
· Easy to adjust, high quality finishing
· Motorized gluing roller. Perfect banding of the panel.
Patent pending.
· Direct adjustment of the trimming bits and copying
devices by digital meters. Easy to adjust.
· Simultaneous adjustment for the tape thickness,
the guide and the gluing roller by a single digital meter.
· Automatic feeder for tape rolls with pneumatic cutting system.
· Trimming unit at 10,000 R/min. Equipped with adjustable copying devices.
· Automatic feeder for tape rolls with pneumatic cutting system.
· Equipped with four rubber rollers on the table to ensure a good
pressure against the gluing rollers.
· Table with antifriction material.
· Panel thickness adjustment by digital meter.
· Automatic temperature control by the machine during all the working process.
After 30 minutes of idle time, the machine gets to stand-by position at 110ºC
to avoid the glue can burn.
· Panel feeder with wide multi-layed belt.
· Front telescopic table extension with rollers.
· Roll holder for rolls up to 590 mm or 24" diameter.
| Tape thickness: | 0.4-3 mm or ( 1/64 to 1/8 " ) |
| Tape height (tapes from 0.4 to 2 mm): | 45 mm( 1.8 " ) |
| Tape height (tapes of 3 mm): | 25 mm( 1.0 " ) |
| Min/max panel thickness: | 13 to 45 mm( 1/2" to 1.8") |
| Min. panel length: | 140 mm( 5.6") |
| Min. panel thickness: | 13 mm( 1/2 ") |
| Work speed: | 5 meter/min( 15 ft / minute) |
| Trimmer speed: | 10.000 /min |
| Ø trimming bits: | 60 mm 4Z ( 2.4") |
| Roller holder capacity: | 590 mm ( 25" ) |
| Tank capacity: | 1 Kg. ( 2.2 Pounds ) |
| Work temperature: | 175-210 °C ( 347 - 410 F) |
| Feeder motor power: | 0,18 KW ( .24 HP ) |
| Trimmer motor power: | 0,37 KW ( .49 HP) |
| Gluing motor power: | 0,09 KW ( .12 HP) |
| Weight: | 260 Kg ( 570 Pounds) |
Pneumatic working pressure: 6 Bars
Air Consumtion at 6 bars : 5 Liters / Minute ( approximate )
Electical Requirements:
220 Volts, 3 Phase, 50/60 Hz, 20 Amps, 1.97/2.07 KW ( 2.77 HP)
