Product Information:
The EB-25 is the Cadillac of the Virutex line. This unit is definitely designed for the serious shop. Features include top and bottom trimmers powered by a single motor, front and rear guillotine end trims and a power feed rate of 15' per minute. Banding is accomplished in almost no time at all. Simply turn the unit on and wait about a minute for the heavy-duty heater to reach full operating temperature and insert your panel under the feeder. The tape is pulled through automatically until it reaches the panel and continues on into the top and bottom trimmers. The front-end trimmer engages and the rear does the same at the proper time. The panel comes out completely trimmed and ready for a light cleaning. A panel came be banded on all four sides, one right after the other without the need for hand trimming between sides. After looking at all the other Hot-Air banders on the market I think you'll decide that this unit is the best unit for the money. I don't think you'll find one other unit that offers these features in this price range. Ships Common Carrier. Specifications: 2 minute Heat-up Time 220 Volts, 15 Amp, single phase No need for compressed air Dimensions: 67.7x37.4x53.1 inches Minimum thickness of the board: 7/16" , 0.43" (11 mm) Maximum thickness of the board: 2.56" (65 mm) Six months warranty for all spare parts. Edgebanders
We demonstrated the EB25 on an episode of All About Tools Live. Click the lick below to see the clip
.jpg)
Easy to adjust. Easy to change parts
For panel edge banding with pre-glued PVC, Melamine and wood veneer tapes.
Automatic power feeder with speed of 15 Ft. per minute.Motorized top and
bottom flush trimming unit. Automatic front and back flush edge trimming.
No compressed air or dust collector required.
Specifications:
- Speed of 15 Ft. Per minute.
- Advanced power feeder with:
- Brushless motor
- Multi Layered Belt backed with hard rubber wheels for a
better gripp and stable movement important when banding large boards
- Board thickness range from 7/16" up to 2" thick
- Maximum tape thickness: up to 1 mm
- Electronic temperature control with range of : 0 - 900 F ( 0 - 500 C)
- 220 Volts, Single, 20 Amps, 1,000 W.
- Welded steel structure with great stability
- Net weight: 260 Pound
- Dimensions: 67" x 37" x 53"
 | Fully automatic power feeder with speed of 15 ft. per minute. Multi layer belt backed up with wheels for stonger and consistant grip |
 | Electronic control panel for heat control, feeder, and emergency switch |
 | Top & Bottom auto flush trim. Spring loaded bearing guides automaticall readjust the cutters to take into account the variation in thickness of the board and always give give flush cut. |
 | Auto front and back flush cut by a paid of blades activated by a stong magnet. Spring loaded assembly makes sure the front cut is always flush. The back cut is adjustable in order to take into account any stretch factor caused by plastic tapes |
