Specialy design for quick, precise mortising on doors or other elements. Easy to work with at site or in the work shop. Mortises doors that have already been hung, without damaging the surface. Measurement adjustment permits multiple mortises in record time.
Also able to work horizontally. Mortises grooved doors or those with overlaps. Advantages over competition: - Vacuum port - Mortise in horizental and vertical position - Advanced hydraulics for precision adjustment and accurate grip Can mortise the face plate. You need to use a corner chisel to sqaure the edges. Part # 2945471 - RC29M corner chisel Equipped from factory with hard metal lock mortiser 1/4" shaft. Includes
a 1" bit. Other size bits can be ordered under the spare parts section of this web site by using the following part numbers: Diameter Part No. 5/8" 1640177 7/8" 1640178 1" 1640179 1-1/8" 1640180 1-1/4" 1640181 Diameter in mm cutting height of 13.5mm 16 mm 1640127 17 mm 1640150 18 mm 1640128 21 mm 1640129 23 mm 1640130 25 mm 1640131 30 mm 1640132 The lock morisers sold in North America (USA and Canada) they all have 1" bit as standard To use the metric mm bits, you need to order the adaptor: Part # 1622326 - Bit Adaptor from inches to metric Universal vacuum port feature is very popular among professionals
Both metric and imperial size bits are available in stock. Includes locking bar to make mortises on several doors at the same height, rubber protectors
for delicate jobs, service keys and universal dust collector outlet port.
Specifications:
Includes a 1" diameter standard bit,
(additional sizes available)
double insulation
Input power: 1,100 W --- 1.5 HP
Max. bit Ø: 1-1/4" (30 mm)
Max. mortising depth: 0-5" (0-125 mm)
Max. mortising depth: 0-7"+ bit dia (177mm + bit Ø )
Max. clamp vise opening : 7-1/2" (190 mm)
No-load speed: 23,000 rounds per minute
Tool-holding shaft included with the FC16I
(*) Bit included with standard equipement.
Carrying Case included
|
Its special fixing system
allows the mortising of
doors that have already
been hung, without
damaging the surface.
The machine is also able
to work horizontally, which
can be especially useful if
deciding to make a series
of mortises, with the doors
unhung.
The FC16I incorporates a
locking bar, which is fixed
to the machine at the height
from the ground
established for the first
mortised door, allowing the
mortising of the
rest of the doors at the same
height without retaking measurements
It also permits to mortise
grooved doors or those with
overlap, thanks to the possibility
of adjusting the centre of the
machine over the section of
the door where the mortise is
required.
The accessory UT16I allows
youto take references for
drilling the hole for the handle
and key cylinder.
The clamp extension UP16I
allows you to fix the machine
on both ends of the door
|
