Sharpening Service
Sharpening Service
A good quality sharpening service can often be a hard thing to find. We've been working with the same service for the last 20 years and we've had nothing but excellent service. Setting up to use this service is easy. Please call our office and we'll put your credit card on file. You ship your blades directly to the sharpener and we charge your card when they have been sharpened and shipped back to you.
We've listed common rates below for your review, if they look good and you'd like to try the service for yourself just give us a call and well get you set up.Turnaround time is 1 week so you'll have to think ahead. Using the USPS Flat Rate boxes is the least expensive way to get your blades back and forth from sharpening. Even customers in Alsaka and Hawaii can now afford to ship their blades in for sharpening.
|  |
Router Bits
Straight flute bits $ 4.55 each
Angled flute bits $ 4.55 each
Cut off (shorten) $ 4.55 each
Spiral Router Bits
Single flute $ 11.70 each
Double flute $ 14.30 each
Compression Router Bits
Single flute $ 15.60 each
Double flute $ 18.20 each
Shaper Cutters
3 wing less than 1" wide $ 9.75 each
Cutters over 1" wide $ 3.25 per inch / wing
Panel Raising Bits
Three wing $ 13.00 each
Four wing $ 17.55 each
Boring Bits
Carbide tipped $ 7.80 each
Steel $ 7.80 each
Non-Ferrous HHS
Standard sharpening only $ 1.04 per inch diameter
Curved tooth & triple chip $ 1.70 per inch diameter
Knives
Joiner and planer $ .65 per lineal inch per knife
Standard Delivery 1 Week
Solid Carbide Spirals 2 weeks
Rush charge add 100%
Excessive wear / chip add 50%
Reverse bevel add 50%
Blades over 18" add 50%
Shear Face Blades add 50% | Blades Sharpening Number of Teeth
-----6 - 40
--- 41 - 60
--- 61 - 80
--- 81 - 100
--- 101 - 120
--- 121 - 130
--- 131 - 150
--- Strob Saw | Cost
$12.08
$17.75
$15.83
$17.25
$21.85
$26.45
$32.20
$ 9.00 | Dado Sets
--- Blades
--- Fillers |
see above pricing
$5.00
| Tip Replacement
--- Standard Tip sizes
--- Strob tips |
$ 3.25
$ 3.75
| Complete Re-tipping
--- Standard blades
--- Strob blades |
$ 1.26 per tooth + sharpening
$ 2.58 per tooth + sharpening
| Hammering (Smithing)
--- Normal flattening
--- Excessive flattening |
No charge
$9.2 0
| Reweld Broken Shoulders
--- Re-weld, seat and gum |
$11.50 per shoulder | Non-Ferrous HHS
--- Standard sharpening only
--- Curved tooth & triple chip |
$ .92 per inch diameter
$1.50 per inch diameter
| Knives
--- Joiner and planer |
$ .60per lineal inch per knife | | | |
|
There are no products matching the selection.
