You have no items in your shopping cart.
The 32" Gutster™ General Purpose Bar(48" overall length) is the original. Whether you are popping off a single strip of trim, gutting a room, or removing an entire roof, the Gutster™ Contractor Bar, with its all-steel construction, will be the only demolition tool you'll need (Except maybe for the (Except maybe for the 40" Gutster™ Flooring Bar and the 24" Gutster™ General Purpose Bar!)
The Gutster™ Contractor Bar eliminates the need to switch between pry-bars, hammers, and scrapers to get the job done. The Gutster™ Contractor Bar allows you (and your crew) to reach further and higher... do three times the work in half the time, and still go home with energy.
Dear Kim, Denise, Karen & John,
We placed our first order with your company and am writing to say what a great tool the Gutster (40/flooring) turned out to be. I was able to take out 500 sq. ft. of tongue and groove flooring which was nailed to the joists - just by myself. I had it all bundled and out the door in three days. The Gutster showed no worse for wear either. It would have been a nightmare without this tool. You shipped it promptly also and your kind customer service is appreciated.
- S. Lydon, Norwood, MA
We all know that time is money... and that the faster you can get demo done, the faster you can get to construction. If you haven't seen the Gutster™ Demo-Bar in action, take a minute and see it in action now. We know that as soon as you see The Gutster™ Demo-Bar tearing into roofs, walls, and floors, you'll agree that The Gutster™ is the only demo tool you'll ever need.
Roofing - All Roofing Materials!
Your Gutster™ Demo-Bar can be used to remove shingles by simply sliding the points under any edge of the shingles. If removing entire roofs, we recommend first cutting the roof between existing rafters with an 8" carbon tip blade from roof ridge to bottom of roof. Then at either end, break roof with the chiseled points of the bar. Find the rafter and center the forks of your Gutster™ Demo-Bar on it, lift off sections one by one.
Flooring - All Flooring Materials!
Cut wood flooring into 4-foot sections using a 7" skill saw set to the depth of the floor to be removed. Use chiseled points of your Gutster™ Demo-Bar to begin working up flooring. Slide bar head under loosened floor boards using angled lifter plates to pry flooring, sliding flat bottom of head on surface.
Walls & Ceilings
Using chiseled points, break through sheet rock or wood on walls to locate studs. Using full length of bar chip through ceiling to locate and expose part of beam. Straddle the stud or beam, slide bar along using angled lift plate to pry off material. The Gutster™ Demo-Bar can be used to straighten and remove rafters and studs. Slide rafter or stud between the forks of the bar and twist into position, or completely twist out.
The Gutster™ Demo-Bar is not for use on concrete!
Fire & Rescue
"I've been a full time professional firefighter for twenty four years. Our company has purchased four bars. In the first month that we had them we used them numerous times. The feed back from our guys is great. In a training exercise in an abandoned house we put this bar to the ultimate test. It opened walls,removed windows and opened the roof area for ventilation. The piercing and prying capabilities of the tool is great and it has become our primary overhauling tool."
- Stephen F. Lydon
Norwood, MA Fire Department
When time is of the essence you want to grab just one tool. The Gutster™ Demo-Bar should be that tool. Light weight so it is easy to carry. Strong to vent roofs, and pop out windows and doors. The long handle keeps you safely back. Your job is stressful enough. Grab a Gutster™ and lighten your load.
|This item ships from:||Middlesex, NJ|
|Mfg Part #||GBAR05|