You have 0 item in your cart

You have no items in your shopping cart.

Subtotal: $0.00

Rip & Gang Blade-FTG/TCG

Rip & Gang Blade-FTG/TCG

These tops are designed for ripping soft or hard woods where chiseling action of FTG is effective. FTG grind is the fastest, most efficient tooth design for rip cuts. These blades can be rebored to fit most sawing machines. ATB Alternate Top Bevel. This is the most popular, saw design, and with good reason. It is excellent for cutting operations with or against the grain, acheiving a high level of quality over a high range of cuts. Top beveled sever the material with a shearing action. Teeth alternate left and right top bevel. TCG - Triple Chip Grind. Alternating triple-edge and flat top for dual action cutting. Triple-edge teeth chip down the center of the kerf, flat top raker teeth follow to clean out the material from both sides, extremly resistant to wear and fracture when cutting hard or abrasive material. FTG - Flat Top Grind. For cutting natural wood with the grain. Larger gullets accept greater chip loads, permitting a higher feed rate. FTG teeth cut with chisel-like action.

Grid  List 

Set Descending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG Learn More
  2. Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG Learn More
  3. Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG

    Rip & Gang Blade-FTG/TCG 14 x 24T FTG Learn More
  4. Rip & Gang Blade-FTG/TCG 14 x 24T TCG

    Rip & Gang Blade-FTG/TCG 14 x 24T TCG

    Rip & Gang Blade-FTG/TCG 14 x 24T TCG Learn More
  5. Rip & Gang Blade-FTG/TCG 14 x 30T FTG

    Rip & Gang Blade-FTG/TCG 14 x 30T FTG

    Rip & Gang Blade-FTG/TCG 14 x 30T FTG Learn More
  6. Rip & Gang Blade-FTG/TCG 14 x 36T FTG

    Rip & Gang Blade-FTG/TCG 14 x 36T FTG

    Rip & Gang Blade-FTG/TCG 14 x 36T FTG Learn More
  7. Rip & Gang Blade-FTG/TCG 14 x 36T FTG

    Rip & Gang Blade-FTG/TCG 14 x 36T FTG

    Rip & Gang Blade-FTG/TCG 14 x 36T FTG Learn More
  8. Rip & Gang Blade-FTG/TCG 14 x 40T FTG

    Rip & Gang Blade-FTG/TCG 14 x 40T FTG

    Rip & Gang Blade-FTG/TCG 14 x 40T FTG Learn More
  9. Rip & Gang Blade-FTG/TCG 16 x 24T FTG

    Rip & Gang Blade-FTG/TCG 16 x 24T FTG

    Rip & Gang Blade-FTG/TCG 16 x 24T FTG Learn More
  10. Rip & Gang Blade-FTG/TCG 16 x 36T FTG

    Rip & Gang Blade-FTG/TCG 16 x 36T FTG

    Rip & Gang Blade-FTG/TCG 16 x 36T FTG Learn More

Grid  List 

Set Descending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5